|
|
|
|
|
|
NEW DRAGONUS II NV VERSION RC Helicopter - Kit Only
|
Our Price: $149.00
|
|
|
450-class helicopter with CCPM (collective cyclic pitch mixing) for precise control. Kit has a rigid and lightweight aluminum frame with assembly nuts pre-attached (N version). This makes the step-by-step assembly much quicker and easier. Feedback on these helicopters has equaled my experience in every way, this has to be the finest quality, best flying helicopter I have had the pleasure of. I am not kidding when I say this plastic head and tail version will outfly most full cnc 450's on the market today. This head is bell/hiller and programmable so you can set it up for beginner flight or the most unreal 3d experience you can get by adjusting the head linkages, takes 2 minutes. The bell mixer heads are good but this is a whole new level of precision and control.
|
|
|
|
|
|
|
|
|
|
|
|
|
dragonus-eliteII NV (new version) full cnc
|
List Price: $269.00
Our Price: $269.00
|
|
|
Fully cnc head and tail and typical dragonus quality and flight characteristics. Performance and precision unmatched in the industry, look at the threads and watch the videos that people post and you will see first hand how much the people that own these helis swear by them. Fully adjustable head just like the NVII, can take you from beginner to 3d pro with a matter of minutes. Full line of replacement parts and upgrades available, these are no knock offs or clones, they are the origin.
|
|
|
|
|
|
|
|
|
|
|
|
|
OUTRAGE G5 kit /CF w/FG blades
|
|
Our Price: $349.00
|
|
|
Designed by the well-respected helicopter designer Charley Stephens, this new heli defines a new concept of low head speed, high voltage micro helicopters. With super low amp draw (average 9amp compared to 25A of other 450 size helicopters) this chopper can perform incredibly double 3D flight time compared to its rivals on a single pack of battery at unbelievable 2400rmp head speed. With programmable head and tail, this heli is so versatile it can be suitable for beginners to highest demand 3D pilots.
* Beautify crafted CNC anodized parts
* True 120 Degree CCPM Servo layout for precision control and geometry
* Compact frame height for enhanced 3D fight characteristics
* Large adjustable battery tray positions for various battery shapes and sizes
* Fiberglass 350mm extremely stable blades
* 15 Degrees +/- achievable pitch ranges
* Programmable head - From Mild to Wild
* Thrust bearings on main blade grips
* One piece 3D dampers
* Ceramic main and tail rotor shaft support bearings
* High quality screw hardware
* Programmable tail rotor ratios 11t included for 4.664:1, (10t Optional for 4.24:1), (12t Optional for 5.088 :1)
* Ball raced double pivot tail control system
* High quality tail rotor drive belt
* Fiberglass painted canopy
* Parts compatibility with other brand helicopters for most crashes.
* Length: 620mm
* Height : 210mm (including head button 203mm without)
* Main Rotor Diameter: 775mm
* Tail Rotor Diameter: 157mm
* Blade Length:350mm
* Main Gear 150T .5 mod gear
* Auto Rotation 106T
* Drive Gear 25T
* Flying Weight 780-850 Grams depending on equipment used
* Black plastic tail blade
* Black fiberglass 350mm main blade
* Painted fiberglass canopy
* Carbon fiber frame and landing gear and fin set
Recommended power System
* 6s1p 1300 mah 25c OUTRAGE XP25.
* 210gMedusa 28-040-1700kv with 11t pinion.
* Hobby wing 40escHobby wing BEC 5/6v 3amp
* HS65MG Servos on Cyclic
* Logictech 2100t Gyro w/3100g servo Current RTF Weight 880gPitch 13 Degrees + and - (15+/- Achievable)Cyclic pitch 7 Degree with Above pitch (9 Degree Max Achievable with max pitch)
|
|
|
|
|
|
|
|
|
|
|
|
|
OUTRAGE G5 kit /G10 w/FG blades
|
|
Our Price: $389.00
|
|
|
Designed by the well-respected helicopter designer Charley Stephens, this new heli defines a new concept of low head speed, high voltage micro helicopters. With super low amp draw (average 9amp compared to 25A of other 450 size helicopters) this chopper can perform incredibly double 3D flight time compared to its rivals on a single pack of battery at unbelievable 2400rmp head speed. With programmable head and tail, this heli is so versatile it can be suitable for beginners to highest demand 3D pilots.
* Beautifully crafted CNC anodized parts
* True 120 Degree CCPM Servo layout for precision control and geometry
* Compact frame height for enhanced 3D fight characteristics
* Large adjustable battery tray positions for various battery shapes and sizes
* Fiberglass 350mm extremely stable blades
* 15 Degrees +/- achievable pitch ranges
* Programmable head - From Mild to Wild
* Thrust bearings on main blade grips
* One piece 3D dampers
* Ceramic main and tail rotor shaft support bearings
* High quality screw hardware
* Programmable tail rotor ratios 11t included for 4.664:1, (10t Optional for 4.24:1), (12t Optional for 5.088 :1)
* Ball raced double pivot tail control system
* High quality tail rotor drive belt
* Fiberglass painted canopy
* Parts compatibility with other brand helicopters for most crashes.
* Length: 620mm
* Height : 210mm (including head button 203mm without)
* Main Rotor Diameter: 775mm
* Tail Rotor Diameter: 157mm
* Blade Length:350mm
* Main Gear 150T .5 mod gear
* Auto Rotation 106T
* Drive Gear 25T
* Flying Weight 780-850 Grams depending on equipment used
* Black plastic tail blade
* Black fiberglass 350mm main blade
* Painted fiberglass canopy
* Black G10 fiberglass frame and landing gear and fin set
* Manual included
|
|
|
|
|
|
|
|
|
|
|
|
|
HDX500SEV2-S
|
|
Our Price: $299.00
|
|
|
Another big step up in quality, performance from the awesome HDX450SE, the HDX500SE kit represents another hottest heli on the market with fully CNC aluminum and fiber composite parts. This new 500-size heli is not as big as a T-REX 600 but just a bit bigger than a T-REX 450. Using 4S1P battery or doulbe 3S1P battiers that are widely used on T-REX 450 and 425mm blades, this is the ideal size for everyone who wants to have another kit besides the T-REX 450SE without spending tons of money on battery for T-REX 600. The quality and craftmanship is SUPERB! Awesome price. Only 299.00! All spare parts available.
HIROBO Lepton Size
Length overall: 860mm
Main Rotor Diameter: 950mm
Tail Rotor Diameter: 160mm
Weight: 830grams(kit)
Main Blades: 425mm fiberglass
Frame: Silver Carbon Fiber and CNC aluminum parts
Main Gear: 94T 0.6M
Tail pulley: 13T
Package Include:
* 425mm Fiberglass Main Blades
* Strong Silver Carbon Fiber Frame
* All CNC aluminum Frame parts
* All CNC aluminum head system
* All CNC aluminum tail system
* Aluminum tail boom
* Composite fiber G10 tail fin set
* High quality painted fiberglass canopy
* Color box.
Feature:
* Fully 7075 aircraft aluminum CNC parts
* Super strong aluminum and fiber composite frame parts adding rigidity
* Adjustable motor mount for easy adjusting motor gear mesh
* New design frame with direct servo connections and reduced the weight of the frame by 50g compared to V1
* Uprade from G10 FRP frame to Silver carbon fiber frame - NEW!
* All New high quality ABEC-3 bearings and high quality fasteners - NEW!
* New design frame with less parts for easy assembly and easy for servo mount
* 425mm main blades for much more stable than T-REX 450 at out door flying
* Fully equipped with high performance ball bearings, more than any other models in its class
* Ideal size for flying both indoor and outdoor
* New design T-REX style head for faster cyclic response
* New design taller main center hub to avoid binding at max pitch - NEW!
* Longer flybar rod V2 305mm adding for cyclic - NEW!
* New 13T CNC aluminum tail pulley at increase tail ratio from 4:1 to 4.3:1 - NEW!
* New mixing arms with new mixing ratio for extreme 3D - NEW!
* Highest quality CNC machining for most demanding accuracy and performance
All Spare Parts available.
Recommend motor : HDX500 890KV brushless motor
Recommend ESC: HobbyWing 60A esc
Recommend Battery: MegaPower 3600mAh 4s1p
Recommend Gyro: GY401
Recommend Servos: 3 x Hitec HS85MG + 1 x Futaba S9254
Recommend Receiver: Futaba R146P or Berg 7
|
|
|
|
|
|
|
|
|
|
|
|
|
Thunder tiger E325
|
|
Our Price: $159.00
|
|
|
The latest innovation by Thunder Tiger, the mini Titan E325. It has the perfect combination of flying stability and the agility for 3D flying.
Specification:
Full Length of fuselage: 25.74"
Full width of fuselage: 4.72"
Total height: 8.3"
Main rotor dia: 28.66" ~ Max 29.45"
Tail rotor dia: 6.14"
Gear ratio: 1:10 ~ 15:4.4
Full equipped weight: 26.50 oz.
The Titan E325 is a mini RC Helicopter of easy approach. Without noise, pollution and pressure, you can fly it in the park and just have fun . Whatever flying style you like, you will be 100% satisfied with this fine machine. With whole new design, the helicopter is stable and quick. You can fly it tenderly and you can fly 3D.. This is simply the best you have never met.
Features
* 120° e-CCPM electronics cyclic collective pitch mixing
* Rigid frame design eliminates flex during 3D maneuvers
* Constant driven Auto-Rotation system
* Interlocking 3 piece frame design
* Rigid one piece-landing skid
* Anti-Rotation swash guide
* Belt driven tail system
* Rear servo mount
Accessories Needed
* Radio Set - Transmitter (6 or more channels), Servo x4, Receiver, Battery, Gyro & Rubber Band.
* Propulsion System - Brushless Motor (OBL 29/36-10 H), Speed Control (No.8041 ACE BLC-40),
Li-poly battery 3S & Battery (Li-poly) charger.
* Adhesives - Epoxy, Instant setting Cyanoacrylate adhesive (CA), Anaerobics retainer (R48) &
Threadlocking (T22).
* Tools - Screw, Needle and Ball Pliers, Nipper, Scissors, Hobby knife, Grease, Hex wrench set,
Rubber band & Double side tap.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hurricane 550 STD (with motor and esc) Helicopter Kit
|
|
Our Price: $299.00
|
|
|
The 30-size powerful EP helicopter from the creator of SHOGUN helicopters. Use 2 batteries from T-REX 450. Real winner!
Now, from the makers of the Zoom, Shogun and various other successful models, comes something much bigger – the Hurricane EP 550 electric helicopter. With an overall length of just over 1m, a main rotor diameter of 1110 mm and fitted with 50cm blades the Hurricane is just a little smaller than a 30-sized helicopter and suitable for beginners and intermediate pilots alike. One small point for anyone new to the sport is that this helicopter uses eCCPM (Electronic Cyclic and Collective Pitch Mixing) so a suitable transmitter will be required although most have this facility these days.
DOWNLOAD MANUAL HERE
BOB FINLESS VIDEOS
Check out TREXTUNING REVIEW
COMES COMBO WITH 850KV BRUSHLESS MOTOR and 50A ESC
SPECIFICATIONS:
* Overall length: 1060mm (41.73”)
* Main rotor diameter: 1110mm (43.30”)
* Tail rotor diameter: 222mm (8.74”)
* Tail Blade length: 80mm
* Rotor head assembly: CCPM control system
• Gear Ratio: 5.4:24.5:1:4.36
* Flying weight: 1900g (4.25-4.50lbs)
Note: Weight will vary depending on size of battery pack and R/C gear used
* Flying duration: 6~8 minutes with 2- 2100 3S 11.1v Li-Po batteries
• Complete with Main and Tail rotor blades.
FEATURES:
• CCPM control system
• Uses 2 2100 3S T-Rex size LiPo Batteries!
• Belt driven tail rotor
• Plastic components made from Dupont aviation engineering plastic for light weight and outstanding durability
• 2 stage gearing for outstanding power
• Full ball bearing equipped
• Full 3D aerobatic capability
• Designed for use with all standard RC gear
Data Sheet
* Length : 1060mm
* Height : 305mm
* Main Rotor Blade:500-550mm
* Main Rotor Diameter:1110-1210mm
* Tail Rotor Diameter:222mm
* Pinion Gear: 5.24~24.5:1:4.36
* Weight: 1900g
|
|
|
|
|
|
|
|
|
|
|
|
|
Hurricane 200 pro w/ esc & motor - 90% rtf ( belt version )
|
|
Our Price: $289.00
|
|
|
* The tiniest 3D capable helicopter equipped with all CNC precision metal head and tail parts.
* Equipped with the fiber glass painted canopy.
* Light-weight 3D canopy ( 9g ) for option.
* Kit comes with BL motor and ESC.
* Only a short time needed for completion. (95% factory assembled)
* The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms.
* Belt driven tail rotor system with one-way main gear.
* 1mm thick Carbon fiber mainframe and fin set.
* The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
* CNC titanium anodized aluminum and Carbon Fiber composite result in a light weight and rigid tail gear case.
* CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control.
* Fully equipped ball bearings.(33 micro bearings)
* Seesaw head with bell-hiller system.
* CCPM collective pitch mechanism (variable pitch).
* Extensive upgrade parts and option parts available.
Specification:
* Overall length: 415mm (including cabin & canopy)
* Main rotor diameter: 428mm
* Tail rotor diameter: 100mm
* Motor: KV4800 brushless motor (included)
* ESC : 12A ESC (included)
* Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.)
* Main rotor blades: SP Blades(included) or Wooden(option)
* Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery
Items needed for assembly:
* 6 (or more) channel heli-capable transmitter (with CCPM function)
* 4 Micro servos (BMS 306BB servo is recommended) or HS-45 x 3 and 1 x HS50 tail servo
* 6 (or more) channel micro receiver
* Micro gyro ( GY-401 or heading hold gyros with higher level are recommended) Align Gyro, Telebe Gyro, HDX gyro
* Battery : Li-Po battery (7.4v~11.1v/550~800mah) recommend Mega Power 850mAh 7.4V 15C
* Charger: Li-Po battery charger
Includes:
90% assembled carbon fiber kit x 1
brushless motor (4800kv) x 1
brushless esc (12amp) x 1
|
|
|
|
|
|
|
|
|
|
|
|
|
HDX450 SE Helicopter Kit V4 - Black Frame/Silver CNC ****NEW!**
|
|
Our Price: $195.99
|
|
|
* The HDX SX450 Super Edition Helicopter is the latest varint of the HDX450SE, designed with the latest updates & current technology available, and produced with the highest quality CNC machining. While most parts are compatible with the world's most popular 450 size electric helicopter, the T-REX 450, the HDX SX450 is designed with best features available, while aiming to eliminate all weak points from the current T-REX 450 SE.
* The CNC swashplate is designed with a complicated locking system to ensure the swashplate does not separate in flight, and all hardware included is constructed of high grade material, featuring hex screws and high quality bearings. Featuring a full 7075 aluminum CNC main rotor and tail rotor, along with a G10 carbon frame, this new HDX SX450 V4 heli has all the major upgrades that can be found in current 450 class heli's, yet at an astounding price. Factor in the included 3400Kv brushless motor, and this heli is set apart from all others in power, perfomance & price.
* Length:650mm * Light weight
* 3D capability
* Revolutionary true 120CCPM frame
* Glitch free SuperFrame
* Super strong CNC 7075 aluminum parts
* Symetrical carbon fiber main blades
* Aluminum landing gear and skids
* Full ball bearings
* Height:245mm
* Main Rotor:680mm
* Tail Rotor:150mm
* Motor Gear:13T/11T
* Main Gear:150T
* Autorotation Tail Drive Gear:109T
* Tail Drive Gear:22T
* Drive Gear Ratio:
* 1 x CNC Head System (4mm Feathering Shaft, 4mm Damper)
* 1 x Flybar rod
* 2 x Flybar paddles
* 2 x Composite G10 Main Frames (1 x left and 1 x right)
* 1 x CNC Silver Aluminum Frame parts set (see pictures below)
* 2 x CNC tail push rod support end with carbon fiber rods
* 1 x Composite G10 Frame parts set (See picture below)
* 1 x Composite G10 horizontal and vertical fins
* 1 x Silver Aluminum CNC Tail system (See picture below)
* 1 x Silver tail boom
* 2 x Silver Aluminum CNC Horizon fin holder
* 1 x Silver Aluminum CNC Landing Gear set
* 1 x Main Gear set (Upper and Lower)
* 1 x Tail drive set (assembly)
* Strong aluminum tail boom
* 1 x Black Blades Holder
* 1 x 325mm Wood Main Blades (1pair)
* 1 x Upgraded powerful Brushless motor 3400KV with fan - NEW!!! (See picture below)
* 1 x Fiberglass canopy - NEW NEW NEW!
* User manual
System requires to fly:
* (1) Gyro
* (3) Cyclic Servos and (1) Tail Servo
* (1) 3S 11.1V 2100mah Battery
* (1) Brushless ESC - 30A+
* (1) Receiver
* (1) Transmitter
|
|
|
|
|
|
|
|
|
|
|
|
|
Align T-REX 250 Combo (Motor + 3 servos + ESC)
|
|
Our Price: $259.99
|
|
|
●Features
●Electric power system.
●Simple and light weight design provides awesome flight performance and extreme 3D capability.
●Rigid carbon fiber frame design.
●Beautiful factory painted fiberglass canopy.
●Φ3.5mm main shaft.
●Φ2.5mm Feathering shaft.
●Φ8.5mm Tail boom.
●Center of gravity of Battery tray designed close to the rotor head.
●Tail rotor drive belt system.
●Length:430mm
●Height:187mm
●Main Blade Length:200/205mm
●Main Rotor Diameter:450/460mm
●Tail Rotor Diameter:108mm
●Motor Ponion Gear:15T
●Main Drive Gear:120T
●Tail Drive Gear:28T
●Drive Gear Ratio:1:8:4.28
●Weight(w/o power system):138g
●Flying Weight:Approx 330g
●Color carton:27.3x10x6.6cm
●Outer carton:56x31x28cm ,24sets/ctn
●T-REX 250 Kit SetX1 set
●200 Main bladesX1set
●205 Main bladesX1set
●RCE-BL15X 15A Brushless ESCX1
(Build-in 5~6V adjustable BEC)
●RCM-BL250 Brushless motor(3400KV)X1
●Motor ponion gear 15TX1
●DS410 Digital servoX3
●40 Tail bladeX1set
●42 Tail bladeX1set
●ClipX1
●#00 Phillips screw driverX1
●0.9 Hexagon screw driverX1
●Dial pitch gauge padX1
Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Head lock gyroX1
4.Specialized servoX1
5.Pitch gaugeX1
6.11.1V 3S Li-Po 850mAh batteryX1
|
|
|
|
|
|
|
