|
|
|
|
|
|
DS285 Digital Hi-Speed Sub-Micro Servo
|
Our Price: $32.00
|
|
|
Key Features
* Ultra-precise centering and movements
* 30% Faster than the previous version
* Weighs only 8.5 grams
|
|
|
|
|
|
|
|
|
|
|
|
|
Futaba S9650 Servo
|
|
Our Price: $50.00
|
|
|
S9650 is the best servo for T-REX tail. It is very popular for T-REX now as it can give very quick and precise tail response.
|
|
|
|
|
|
|
|
|
|
|
|
|
Esky Servo 8g digital
|
|
Our Price: $9.00
|
|
|
Specification
- Standard voltage : DC5V +- 1V
- Speed : 0.1 sec/60'
- Weight : 7.5g
- Torque : 1.0kg-cm(VCC=5V)
- MAX corner : About 150 degree
- Dimensions : 22.8 x 11.5 x 20.8
- Certificate: CF,FCC
|
|
|
|
|
|
|
|
|
|
|
|
|
Hitec HS-65MG Mighty Feather Metal Gear Micro Servo
|
|
Our Price: $32.00
|
|
|
Electronic helicopters are widespread in this era and more accurate control is needed. Therefore, standard servos with logical chip are no longer suitable. A lot of servos of different volume and weight come out in today’s model market. Though they have higher rotational speeds and torque, they don’t have those characteristics of digital servos’:
● Higher resolution
● The tightest dead band
● Accurate positioning
● Faster control response
● Quicker acceleration
● Constant torque throughout the servos travel
● Increased holding power when stationary
This is the Hitec HS-65MG Mighty Feather Metal Gear Micro Servo with
Universal Futaba J, Hitec S, JR and Airtronics Z Connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
INO-LAB DIGITAL METAL GEAR BB SERVO 9.7g
|
|
Our Price: $31.99
|
|
|
INOLAB Metal Gear Digital Servo 9.7g
Made in Korea, excellent quality, precision and reliability.
Features:
High Torque
Metal Gear
Ball Bearing
Excellent for park flyers and foamies. Especially great for 450 size helicopters cyclic servos. These are tested to prove it is a better choice for Hitec HS-65MG alternative. Highly recommend for T-REX 450 and other 450 size helicopters.
TECHNICAL DATA
OPERATING VOLTAGE :
TEST VOLTAGE :
OPERATING SPEED :
STALL TORQUE :
FEATURES
MOTOR TYPE :
SIZE :
WEIGHT : PULSE WIDTH CONTROL
4.8V ~6.8V
AT 4.8V AT6V
0.16sec/60 0.13sec/60
2.5Kg.cm(34.72oz.in) 2.7Kg
METAL BRUSH 3POLE MOTOR
MR74 BALL BEARING
23.0x11.4x24.1mm(0.91x0.45x0.94in)
9.77g(0.34oz)
|
|
|
|
|
|
|
|
|
|
|
|
|
ULTRA FAST 0.09sec/60 INO-LAB TAIL SERVO T-REX 450
|
|
Our Price: $17.99
|
|
|
INOLAB Ultra Fast Tail Servo 9.0g
Made in Korea, excellent quality, precision and reliability.
Features:
High Torque
Ultra fast
Ball Bearing
-SPEC-
Power : 4.8V
Speed : 0.09s/60
Torque
1.0kg.cm (Dynamic torque: 0.6kg.cm)
Size : 23.0X11.4X23.7(0.91X0.45X0.94in)
Weight : 8.90g(0.31oz)
Application : glider, micro electric helicopters. such as T-REX 450 and OUTRAGE G5 helicopters
|
|
|
|
|
|
|
|
|
|
|
|
|
INO-LAB METAL GEAR CORLESS DIGITAL SERVO 0.09sec/9.6kg T-REX 600
|
|
Our Price: $69.95
|
|
|
INOLAB Metal Gear Digital Servo 52g
Made in Korea, excellent quality, precision and reliability.
Excellent for T-REX 600 cyclic servos and other 30-50 size helicopters. Also for parkflyers and shockflyers
Features:
High Torque
Ultra Speed
Metal Gear
Ball Bearing
Specs:
Speed: .9sec/60deg
Stall Torque: 9.6kg
Weight: 52g
Size: 39.5x36.7x19.5mm
|
|
|
|
|
|
|
|
|
|
|
|
|
INO-LAB HG-D261HB 0.06sec/60 CORLESS DIGITAL TAIL SERVO - T-REX 500
|
|
Our Price: $54.00
|
|
|
The HG-D261HB ultra high speed digital servo with new coreless motor technology is a great choice for extremely high performance tail control on your 400-500 class helicopter.
Operating Speed:
Dynamic Torque:
Stall Torque:
0.07 sec (60)
2.4Kg/cm (33.16oz/in)
3.0Kg/cm (41.62oz/in)
0.06 sec (60)
3.0Kg/cm (41.62oz/in)
3.6Kg/cm (50.09oz/in)
ADDITIONAL TECHNICAL DATA
CONTROL SYSTEM
: PULSE WIDTH CONTROL
OPERATING VOLTAGE
: 4.8V ~ 6.0V
OPERATING TRAVEL
: 30/ ONE SIDE PULSE TRAVELING 370us
DIRECTION
: COUNTERCLOCKWISE/ PULSE TRAVELING 1500 TO 1870
DEAD BANDWIDTH
: 2us
FEATURES
AMPLIFIER TYPE
: DIGITAL PULSE WIDTH CONTROLLER & FET DRIVER
LONG LIFE POTENTIOMETER
: 500,000 cycles
MOTOR TYPE
: CORELESS MOTOR
TOP BALL BEARING
: MR106 BALL BEARING
GEAR MATERIAL
: HEAVY DUTY CARBONITE GEARS
HORN GEAR SPLINE
: 25 SEGMENTS/ 5.96 (FUTABA TYPE)
SPLINED HORNS
: 4 CLASS
CONNECTOR WIRE LENGTH
: 270mm (10.63in)
CONNECTOR WIRE STRAND COUNTER
: 0.08mmx30EA
|
|
|
|
|
|
|
